digestkrot.blogg.se - Editpad lite instruction manual youtube

EDITPAD LITE INSTRUCTION MANUAL YOUTUBE SOFTWARE
EDITPAD LITE INSTRUCTION MANUAL YOUTUBE DOWNLOAD

Make sure that both batteries in each column have Follow the polarity markings when installing two batteries in each.Note the polarity markings at the base of the battery holder assembly.Provide 14W initial intensity and 3.5 hours of high intensity light.Ĭonsumer ni-cads reduce intensity and burn time. Never look into the face of the lite because of itsī AT TERY IN STA LLATION_Īccepts eight C-cell batteries, alkaline or ni-cad. Slide the white lock upward towards the light body. The switch fully to the right to turn ON the light. Rotate the switch to the left to turn the light OFF. Unlock the switch by sliding the white-colored lock down. The large rotating switch with sliding lock is easily operated with one

Push the lever downĪnd slide the lever in to the locked position. Slightly on the body and rotate the lever clockwise. To seal the light, simply reverse the opening sequence.Possible damage to the internal components.

EDITPAD LITE INSTRUCTION MANUAL YOUTUBE SOFTWARE

Click 'Report Spyware' link on the top if you found this software contains any form of malware, including but not limited to: spyware, viruses, trojans and backdoors.

EDITPAD LITE INSTRUCTION MANUAL YOUTUBE DOWNLOAD

Proper alignment of the body with the front is extremely important to avoid Multi Edit 2008 Lite for SAS 11.04.00 is 100 clean This download (SetupMeLS2008.exe) was tested thoroughly and was found 100 clean.

Align the handle on the body with the handle reference on the battery holder.

Place locking lever in the open position (pull out, flip up, and rotate lever).

Check that the o-ring and sealing surfaces areĬlean and undamaged make sure the o-ring is positioned properly on the inner recess of the front.

Place the front lens face down on a flat surface.

Make sure the on/off switch has been rotated left to the off position.

Place the clean o-ring on the inner recess of the front head assembly.ĭo not dent or damage the front edge of the lite body as the o-ring seals against this surface.ĬL OSING THE LITE_ Never use spray lubricant because it will crack the plastic. It is not necessary to lubricate the o-ring.

Keep the o-ring and sealing surfaces clean. Spring automatically pushes open the light.

Rotate the lever counter-clockwise 90° and the internal.

Flip the locking leverĭown and the C-Lite 8 seals with ease and confidence. The internal spring automatically pushes open the light forĮasy bulb or battery replacement. Simply extend the locking lever, flip it up, and rotate. The unique flip-lock lever makes opening and closing